نویسندگان |
عنوان مقاله |
نام نشریه |
شماره |
صفحه |
سال چاپ |
|
Vibration Isolation of a GA Optimized Biomechanical Model of a Railway Passenger Using MR Damper Seat Suspension |
International Journal of Vehicle Structures & Systems IJVSS |
1 |
1-8 |
2010 |
|
Sensitivity Analysis of Air Mass Flow Rate through Underhood by Simulation of Flow from Front Grille to Undertray |
International Review of Mechanical Engineering IREME |
4 |
|
2011 |
|
Analysis of Deflection of Rectangular Plates Under Different Loading Conditions |
Internatıonal Journal of Natural and Engineering Sciences |
3 |
15-20 |
2012 |
|
Geometry optimization of double wishbone suspension system via genetic algorithm for handling |
Journal of VIBROENGINEERING |
2 |
827-837 |
2012 |
|
Finite Element Analysis of Composite High-Pressure Hydrogen Storage Vessels |
Journal of Materials & Environmental Science |
1 |
63-47 |
2013 |
|
Analytical framework for analyzing brake squeal noise using assumed-modes approach |
Journal of VIBROENGINEERING |
3 |
1354-1364 |
2012 |
|
Optimization
of Suspension System of Off-Road Vehicle for Vehicle Performance Improvement
|
Journal of Central South University
|
|
|
2013 |
|
A
Biomechanical Model as a Seated Human Body for Calculation of Vertical
Vibration Transmissibility Using Genetic Algorithm
|
Journal of Mechanics in Medicine and Biology
|
|
|
2013 |
|
Optimization
of a Passenger Occupied Seat with Suspension system Exposed to Vertical
Vibrations using Genetic Algorithms
|
Journal of VIBROENGINEERING
|
|
|
2013 |
|
THE
INFLUENCE OF GEOMETRIC PARAMETERS AND MECHANICAL PROPERTIES OF ADHESIVE ON
STRESS ANALYSIS IN ADHESIVELY BONDED ALUMINUM SINGLE LAP JOINT
|
Transactions of FAMENA
|
|
|
2014 |
|
Design
and analysis of a spherical pressure vessel using finite element method
|
World Journal of Modelling and Simulation
|
|
|
2014 |
|
Design
and energy absorption enhancement of vehicle hull under high dynamic loads
|
Journal of Central South University
|
|
|
2014 |
|
Finite
Element Analysis of Mono-and Bi-Adhesively Bonded Functionally Graded Adherend
|
Journal of Failure Analysis and Prevention
|
|
|
2014 |
|
Simulation
of automobile fuel consumption and emissions for various driver's manual
shifting habits
|
Journal of Central South University
|
|
|
2014 |
|
Stress
and dynamic analysis of optimized trailer chassis
|
Tehnički vjesni
|
|
|
2014 |
|
Analysis
of porosity-induced stress intensity factors for the evaluation of
inline-computer tomography scans of cast parts
|
The International Journal of Advanced
Manufacturing Technology
|
|
|
2014 |
|
Prediction
of fatigue life for multi-spot welded joints with different arrangements using
different multiaxial fatigue criteria
|
Materials
& Design
|
|
|
2015 |
|
Modeling
and Semi Active Vertical Vibration Control of a GA Optimized 7DoF Driver Model
Using an MR Damper in a Seat Suspension System
|
JOURNAL
OF VIBRATION ENGINEERING & TECHNOLOGIES
|
|
|
2015 |
|
Dynamic Analysis and Improvement of Crashworthiness Characteristics of
Trainsets of Iran Railway
|
J. Mater. Environ. Sci
|
|
|
2015
|
|
Prediction
of fatigue life for multi-spot welded joints with different arrangements using
different multiaxial fatigue criteria
|
Materials
and Design
|
|
|
2015 |
|
Simulation of Driver Model for Traffic Safety Considering
Road Conditions
|
J. Mater. Environ. Sci
|
|
|
2015 |
|
Numerical
simulation of metallic honeycomb sandwich panel structures under dynamic loads
|
J. Mater. Environ. Sci
|
|
|
2015 |
|
Modeling
and Semi Active Vertical Vibration Control of a GA Optimized 7DoF Driver Model
Using an MR Damper in a Seat Suspension System
|
Journal of VIBROENGINEERING
|
|
|
2015 |
|
Calculation of APMS and STHT Responses in Three
Translational Axis Vibration for Human Body Using Biomechanical Modeling and
Matrix Method
|
Computational Research Progress in Applied Science
& Engineering
|
|
|
2016 |
|
Blade
shape and thickness influence of multi-blade cutting tool during axial impact
to the extruded aluminum tube
|
Mechanics
|
|
|
2016 |
|
Effect of Adding Perlite and Carbon Nanotubes on
Noise Absorption of Plaster Panels
|
Journal of Engineering and Applied Sciences
|
|
|
2016 |
|
Analysis of free and forced vibration of FGM
rectangular floating plates (in contact with fluid) using the theory of Mindlin
|
J. Mater. Environ. Sci
|
|
|
2016 |
|
Dynamic
rupture and crushing of an extruded tube using artificial neural network (ANN)
approximation method
|
Journal of Central South University
|
|
|
2016 |
|
A
Comparison between cutting and folding modes of an extruded aluminum alloy tube
during impact using ductile failure criterion
|
Mechanics & Industry
|
|
|
2016 |
|
Reliability
techniques to reduce the risk of failure in cng composite pressure vessel
|
QUID: Investigación, Ciencia y Tecnología
|
|
|
2017 |
|
Biomechanical
modeling of a seated human body exposed to vertical and horizontal vibrations
using genetic algorithms
|
Journal of Vibration Engineering & Technologies
|
|
|
2018 |
|
Numerical
simulation of stress in conventional and functionally graded thermal barrier
coating YSZ/NiCrAlY and comparison with results of nano-indentation stress
measurement method
|
Amirkabir Journal of Mechanical Engineering
|
|
|
2019 |
|
Bond
behavior between steel and Glass Fiber Reinforced Polymer (GFRP) bars and ultra
high performance concrete reinforced by Multi-Walled Carbon Nanotube (MWCNT)
|
Steel and Composite Structures
|
|
|
2020 |
|
Experimental
Investigation of Tungsten Inert Gas Welding Input Parameters Effects on
Mechanical Characteristics
|
International
Journal of Engineering TRANSACTIONS B:
Applications
|
|
|
2021 |
|
A
study on the modified algorithm for image processing in Tracking Seam Welding
|
International
Journal of Engineering TRANSACTIONS B:
Applications
|
|
|
2021 |
|
Experimental
study of the defects, mechanical and microstructural characteristics of
friction-stir-welded Al 6061 sheets
|
Surface
Topography: Metrology and Properties
|
|
|
2021 |
|
An
Exhaustive Evaluation of Fracture Toughness, Microstructure, and Mechanical
Characteristics of Friction Stir Welded Al6061 Alloy and Parameter Model
Fitting Using Response Surface Methodology
|
Journal of Materials Engineering and Performance |
|
|
2022
|